Radiator - coolant
The coolant must only be checked or
topped up if the power unit is cold.
As the cooling system is pressurised,
wait for at least one hour after
slacken the cap two turns to allow
the pressure to escape. Once the
pressure has fallen, remove the cap
and top up the level.
M A I N T E N A N C E
Top up the level. If you have to add
more than 1 litre, you should have
the cooling system checked by
Make sure that the cap is on
Note: The necessity to top up
malfunction that should be checked
at the earliest opportunity.
Note: On vehicles equipped with a
particle filter, the cooling fan may
operate for some ten minutes after
the engine has stopped.
Topping up the
should be between
the MAX and MIN
marks on the header
Adding engine oil
Remove the dipstick before topping
up. Check the level after filling.
Screw on the cap before closing the
Quality: See "Maintenance Guide".