Select the waveband and memory
bank required using button E.
automatic or manual search.
Keep pressing for more than two
seconds on one of the pre-selection
buttons 1 to 6 on the keypad P.
The sound momentarily cuts off,
then returns to its previous level to
confirm that it has memorised the
Automatic memorisation of
transmitters (Autostore function)
In FM, if you hold down button E
for more than two seconds, your
radio will automatically memorise
the 6 strongest stations on the FM3
The display shows "FM AST".
The radio memorises the 6 strongest
transmitters, deleting the 6 previously
After the memorisation, the radio
goes directly to memory 1 of memory
- If the traffic information function
memorised as priority.
If it is unable to memorise any new
stations, the system will retain the
previously memorised stations.
- If the system is unable to find 6
stations, the unfilled memory slots
will remain free.
A U D I O
Recall of pre-set stations
Press button E briefly to select the
required waveband and memory
A short press on one the pre-
keypad P recalls the corresponding
memorised station. You can also
do this using the control 3 at the
If it is a RDS station, the frequency
appears some seconds before the
station may prompt a search for
a frequency corresponding to the
region where you happen to be (see