I N S T A L L A T I O; Unpacking And Inspection; Removing From Packaging; Inspecting Contents - Fluke MOLBOX RFM Operation And Maintenance Manual

2 . I
2 . I
N S T A
N S T A
2.1

UNPACKING AND INSPECTION

2.1.1

REMOVING FROM PACKAGING

molbox RFM is delivered, along with its standard accessories, in a corrugated container with
polyurethane inserts to hold it in place.
Remove the molbox RFM and its accessories from the shipping container and remove each
element from its protective plastic bag.
2.1.2

INSPECTING CONTENTS

Check that all items are present and have NO visible damage.
A molbox RFM includes:
molbox RFM Reference Flow Monitor
Report of Calibration
ACCESSORIES, INCLUDING:
1
1
1
1
2
1
* Equivalent to Swagelok P/N SS-QM2-S-200
2.2

SITE REQUIREMENTS

Install molbox RFM on any stable surface at a convenient height.
extendible so that the unit can be inclined for easier viewing.
The molbox RFM can also be mounted in a standard 19-in. rack mount using the optional
rack mount kit (P/N 401465). For additional information, contact your DHI Sales
Representative.
When installing molbox RFM, consideration should be given to where the molbloc flow
measuring element and associated hardware will be located. molbox RFM may be placed on
a shelf or cart at a different height than the molbloc, but the distance between the molbloc
and molbox is limited by the length of the cable and pneumatic lines connecting them. If you
will locate the molbox at a different height than the molbloc, the small errors that would be
associated with the difference in pressure can be removed using the molbox RFM head
correction (see Section 3.6.8).
L L A T I O N
L L A T I O N

Table 7. molbox RFM Parts List

DESCRIPTION
Operation and Maintenance Manual
Power Cord (7.5 ft.)
Set of (2) molbox to molbloc pressure connecting
tubes
molbox to molbloc electrical/data connection
cable
straight through quick connector stem
General Accessories CD (white)
(Important: Includes system support software
and documentation.)
Page 15
2. INSTALLATION
PART #
FAM0005
550100
550107
100770
401125
102096
101889*
102987
The front feet are
© 1998-2007 DH Instruments, a Fluke Company