8Clean; Micro] (Optional) - Fluke MOLBOX RFM Operation And Maintenance Manual

molbox™ RFM™ OPERATION AND MAINTENANCE MANUAL
With the FREEZE DISPLAY active, the MAIN run screen is:
Pressing [ENTER] causes the current flow measured by molbox RFM to be
captured and displayed.
3.4.6.8
To activate the CLEAN DISPLAY.
To activate the CLEAN DISPLAY press [DISPLAY] and select <8clean>.
Selecting <8clean> returns to the MAIN run screen with the CLEAN DISPLAY active.
With the CLEAN DISPLAY active, the MAIN run screen is:
3.4.7

[MICRO] (OPTIONAL)

PURPOSE
To turn ON and OFF automatic operation of the optional MICRORANGE FLOW
MEASUREMENT function.
© 1998-2007 DH Instruments, a Fluke Company
1. Standard MAIN run screen top line.
2. Flow measured in the current flow units when
[ENTER] was pressed (displays 0.00 by
default when FREEZE DISPLAY is first
activated).
If the flow measurement unit is changed while the FREEZE DISPLAY is active,
the FREEZE value defaults back to zero.
To go to a DISPLAY other than FREEZE, press [DISPLAY] and make a new
DISPLAY choice.
<8CLEAN>
PURPOSE
See Section 3.4.6, PRINCIPLE.
OPERATION
1. Standard MAIN run screen top line.
2. "Clean" second line.
To go to a DISPLAY other than CLEAN, press [DISPLAY] and make a new
DISPLAY choice.
Page 68
* 101.75 sccm N20
F 99.24
* 101.45 sccm N2O