Saving Data To A Usb Storage Device - Yamaha M7CL Quick Start Manual

Saving data to a USB storage device.

The scenes and set up of an M7CL console can be stored to an external USB storage device. This serves to back up
the console's internal memory and allow transfer of the data to another console in another territory. Files made on
either M7CL32/48 or M7CL-48ES channel version will open in the other version.
In the unusual case that fi les were created in an M7CL32/48 loaded with MY16-ES64 EtherSound cards and using
SB168-ES external stageboxes, fi les must be "converted" to work with consoles not using the MY16-ES64 cards;
even if it is M7CL-48ES. The reverse operation also needs "conversion". Just press [STAGE BOX DATA CONVERSION]
button and follow the on screen instructions. The conversion process does not alter the data on the USB device.
Simply inserting a USB storage device will open the SAVE /LOAD pop-up screen.
If your stick is already connected then you can access the SAVE /LOAD pop-up from SETUP in the function access
panel and then press SAVE/LOAD.
Pressing the SAVE button will result in an ALL DATA save.
The text box explains what is included in that data fi le.
Saved on USB storage device as
ALL DATA fi le.
All the scene data from the above list for all the
scenes.
The current scene (the scene in use at the time of
SAVE).
External HA to slot assignment
Safe assignments
Work Clock settings
CUE Pop-up settings; PFL trim inputs, DCA trim, PFL
trim Outputs
Monitor Pop-up settings; (levels, source on/off, mono,
link)
Metering point selection
MIDI settings
Outport settings (delay and level)
User Libraries
EQ/HPF, (User and ROM)
Dynamics (not key-in), (User and ROM)
GEQ, (User only)
Effects (User and ROM)
User Access Level
Preferences
User Defi ned Keys
Loading data to the console from a USB storage device.
When an ALL DATA fi le is loaded into a M7CL all the data in the console is over-written. (Except the few items like
Passwords in the text box below). Similarly if a LIB scenes-only fi le is loaded all existing scenes are over-written
but setup data like User Defi ned Keys are retained. LIB fi les are discussed later.
M7CL Quick Start Guide Part 3
You can also access the CREATE USER KEY pop-up from
this page. In addition to Administrator-set user access
privileges the key stores your preferences and User De-
fi ned Key settings. So it's a useful way to transfer User
Defi ned Keys and preferences to another console when
you are starting a new project.
Stored on User Authentication Key.
User Access Level
Preferences
User Defi ned Keys
10