Table of Contents
Advertisement
Advanced Setup
Configure Controller
Controller Settings
Use the Controller Settings dialog to change Intel RAID Controller SRCU31 parameters and
settings. All information concerning physical, logical, array and host drives are stored twice
(primary and secondary configuration data) on each hard disk drive. For example, the Intel RAID
Controller SRCU31 itself carries no configuration data of a specific disk array. For this reason the
migration of host drives between Intel RAID Controller SRCU31s is very easy and secure, even if
the SCSI IDs and channels are changed. Simply connect the hard disk drives to the new Intel
RAID Controller SRCU31, and the host drives will be automatically available. See Figure 37.
Table 15.
Controller Settings
Parameter
Alternatives
Cache
On
Off
Delayed Write
On
Off
BIOS
Enabled
Disabled
Removed
Storage Console
Figure 37. Controller Settings Dialog
Description
Intel RAID Controller SRCU31 cache (write and read cache) On
Intel RAID Controller SRCU31 cache (write and read cache) Off
Write cache On
Write cache Off
BIOS enabled
BIOS disabled, but <Ctrl> + <G> allowed
BIOS and <Ctrl> + <G> disabled
continued
101
Advertisement
Table of Contents
