Select Controller; Logical Configuration Menu; Configuration Menu Refresh Settings - Intel SRCU31A - Server RAID U3-1A Controller User Manual

User guide

Table of Contents

These menu options are also available if you click the right mouse button on the corresponding icon

in the Physical or the Logical Configuration windows. See Table 19.

Table 19.

Option

Refresh on

Refresh if window becomes active

Refresh information every ... seconds

Select Controller

The Select Controller window is used to select an Intel RAID Controller SRCU31 for all further

actions within StorCon+. See Figure 75.

Select the desired protocol (Windows NT/95/98, Sockets, IBM

between the StorCon+ and the system equipped with the Intel RAID Controller SRCU31 by double

clicking on the protocol icon on the very left side of the window. If you want to select an Intel

RAID Controller SRCU31 via TCP/IP (sockets), type in the corresponding TCP/IP address or the

server system's name. Enter a user name and password. This information is transmitted with

encryption.

128

Description

Activates and deactivates the window update.

Update the window if it becomes active.

Sets the frequency for automatic window refreshes.

Figure 75. Logical Configuration Menu

†

NetBIOS) for the communication

Intel RAID SRCU31 Users Guide

Table of Contents

Do you have a question about the SRCU31A - Server RAID U3-1A Controller and is the answer not in the manual?

Srcu31