Table of Contents
Advertisement
3. Press <Esc> to return to the previous screen.
4. Access the "Hard Disk Drive" submenu and make sure the "[Legacy SCSI Option ROM]" is on
the top of the priority list.
✏
NOTE
In the "Hard Disk Drive" submenu, "[Legacy SCSI Option ROM]" may have different wording.
5. Press <F10> to save the changes and exit. The system will reboot.
Install the Operating System (choose from either Windows 2000
or Red Hat Linux 7.1)
Installing Windows 2000
Install Windows 2000:
IMPORTANT: When the blue setup screen first appears, hit <F6> key.
1. Boot the system with the Windows 2000 CD-ROM.
2. Press <F6> as soon as the first blue screen appears to bypass mass storage detection.
3. When prompted to specify a mass storage controller:
•
Select "S" to specify additional storage devices.
•
Insert the Windows 2000 Installation driver diskette.
•
Press <Enter> to select the "Installation Driver" and continue with Windows installation.
42
Intel RAID SRCU31 Users Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the SRCU31A - Server RAID U3-1A Controller and is the answer not in the manual?
Questions and answers