Microphone.setsilencelevel() - MACROMEDIA FLASH MX 2004-ACTIONSCRIPT LANGUAGE Reference

Microphone.setSilenceLevel()

Availability
Flash Player 6.
Usage
active_mic.setSilenceLevel(level:Number [, timeout:Number]) : Void
Parameters
An integer that specifies the amount of sound required to activate the microphone and
level
invoke
Microphone.onActivity(true)
value is 10.
An optional integer parameter that specifies how many milliseconds must elapse
timeout
without activity before Flash considers sound to have stopped and invokes
Microphone.onActivity(false)
Returns
Nothing.
Description
Method; sets the minimum input level that should be considered sound and (optionally) the
amount of silent time signifying that silence has actually begun.
•
To prevent the microphone from detecting sound at all, pass a value of 100 for
Microphone.onActivity
•
To determine the amount of sound the microphone is currently detecting, use
Microphone.activityLevel.
Activity detection is the ability to detect when audio levels suggest that a person is talking. When
someone is not talking, bandwidth can be saved because there is no need to send the associated
audio stream. This information can also be used for visual feedback so that users know they (or
others) are silent.
Silence values correspond directly to activity values. Complete silence is an activity value of 0.
Constant loud noise (as loud as can be registered based on the current gain setting) is an activity
value of 100. After gain is appropriately adjusted, your activity value is less than your silence value
when you're not talking; when you are talking, the activity value exceeds your silence value.
This method is similar in purpose to Camera.setMotionLevel(); both methods are used to specify
when the
onActivity
significantly different impact on publishing streams:
•
Camera.setMotionLevel()
Even if a video stream does not detect motion, video is still sent.
•
Microphone.setSilenceLevel()
is considered silent, no audio data is sent. Instead, a single message is sent, indicating that
silence has started.
464 Chapter 2: ActionScript Language Reference
. Acceptable values range from 0 to 100. The default
. The default value is 2000 (2 seconds).
is never invoked.
event handler should be invoked. However, these methods have a
is designed to detect motion and does not affect bandwidth usage.
is designed to optimize bandwidth. When an audio stream
;
level