Who Should Read This Guide; How To Use This Guide - Cisco CSACS-1121-K9 Reference Manual

Preface
This guide describes how you can configure and maintain Cisco Secure Access Control System
(ACS) 5.1 by using the command-line interface (CLI). Each topic provides a high-level summary of the
tasks required for using the CLI in the Cisco Application Deployment Engine (ADE) OS 1.2 that, in
combination with ACS 5.1, runs on the CSACS-1121 appliance.
This preface includes:
•
•
•
•
•
•
•
Note Use this guide in conjunction with the documentation listed in

Who Should Read This Guide

The majority of the instructions in this guide are straightforward; however, a few are complex. Therefore,
only experienced users should use these instructions.
Use this guide in conjunction with the documentation listed in
Note

How to Use This Guide

Cisco makes the following recommendations for using this document:
•
•
•
OL-18996-01
Who Should Read This Guide, page ix
How to Use This Guide, page ix
How This Guide Is Organized, page x
Document Conventions, page x
Documentation Updates, page xi
Related Documentation, page xi
Obtaining Documentation and Submitting a Service Request, page xii
Read the document in its entirety. Subsequent sections build on information and recommendations
discussed in previous sections.
Use this document for all-inclusive information about the ACS appliance.
Do not vary the command-line conventions (see Document Conventions, page
CLI Reference Guide for the Cisco Secure Access Control System 5.1
Related Documentation, page
Related Documentation, page
x).
xi.
xi.
ix