Show Inventory - Cisco CSACS-1121-K9 Reference Manual

Appendix A ACS Command Reference
eth1
lo
sit0
acs/admin#
Related Commands Command
interface

show inventory

To display information about the hardware inventory, including the ACS appliance model and serial
number, use the show inventory command in the EXEC mode.
Syntax Description |
OL-18996-01
RX bytes:574274908 (547.6 MiB)
Interrupt:169
Link encap:Ethernet
inet6 addr: fe80::216:36ff:fe56:61d1/64 Scope:Link
UP BROADCAST MULTICAST
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b)
Interrupt:177
Link encap:Local Loopback
inet addr:209.165.201.1 Mask:255.255.255.224
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING
RX packets:21617 errors:0 dropped:0 overruns:0 frame:0
TX packets:21617 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3587148 (3.4 MiB)
Link encap:IPv6-in-IPv4
NOARP MTU:1480
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b)
show inventory |
Output modifier variables:
begin—Matched pattern. Up to 80 alphanumeric characters.
•
count—Count the number of lines in the interface. Add number after the
•
word count.
end—End with line that matches. Up to 80 alphanumeric characters.
•
exclude—Exclude lines that match. Up to 80 alphanumeric characters.
•
• include—Include lines that match. Up to 80 alphanumeric characters.
• last—Display last few lines of output. Add number after the word last.
Up to 80 lines to display. Default 10.
TX bytes:268869567 (256.4 MiB)
HWaddr 00:16:36:56:61:D1
MTU:1500 Metric:1
TX bytes:0 (0.0 b)
MTU:16436 Metric:1
TX bytes:3587148 (3.4 MiB)
Metric:1
TX bytes:0 (0.0 b)
Description
Configures an interface type and enters the interface configuration
submode.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
Show Commands
A-75