Show Commands
Syntax Description
statistics
|
Table A-9
|
Defaults
No default behavior or values.
Command Modes
EXEC
Usage Guidelines
None.
Examples
Example 1
acs/admin# show cpu
processor : 0
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-70
Displays CPU statistics.
Output modifier variables:
•
begin—Matched pattern. Up to 80 alphanumeric characters.
•
count—Count the number of lines in the output. Add number after the
word count.
|—Output modifier variables (see
•
end—End with line that matches. Up to 80 alphanumeric characters.
•
exclude—Exclude lines that match. Up to 80 alphanumeric characters.
•
include—Include lines that match. Up to 80 alphanumeric characters.
last—Display last few lines of output. Add number after the word last.
•
Up to 80 lines to display. Default 10.
|—Output modifier variables (see
Output Modifier Variables for Count or Last
Output modifier variables:
•
begin—Matched pattern. Up to 80 alphanumeric characters.
•
count—Count the number of lines in the output. Add number after
the word count.
|—Output modifier variables.
•
end—End with line that matches. Up to 80 alphanumeric
characters.
•
exclude—Exclude lines that match. Up to 80 alphanumeric
characters.
include—Include lines that match. Up to 80 alphanumeric
•
characters.
last—Display last few lines of output. Add number after the word
•
last. Up to 80 lines to display. Default 10.
|—Output modifier variables.
Appendix A
ACS Command Reference
Table
A-9).
Table
A-9).
OL-18996-01