Acs Reset-Password - Cisco CSACS-1121-K9 Reference Manual

EXEC Commands
Usage Guidelines You cannot use this command on a secondary ACS node.
After you use this command, you must access your primary ACS node via the web interface and change
the password. If you use the default password for the web interface (default) to access the ACS
Configuration mode (which requires you to provide the web interface username and password), the login
fails and the system prompts you to change the default password.
Examples
acs/admin# acs reset-password
This command resets the 'ACSAdmin' password to its original value.
Are you sure you want to continue?
Password was reset successfully
acs/admin#
Related Commands Command
acs (instance)
acs backup
acs-config
acs patch
acs reset-config
acs restore
acs support
backup
backup-logs
debug-log
export-data
replication force-sync
restore
show debug-adclient
show acs-logs
show application
show version
acs restore
To restore an ACS configuration (not including the ADE OS data) from one ACS node to another, use
the acs restore command in the EXEC mode.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-18
acs restore backup-file-name repository repository-name
(yes/no) y
Description
Starts or stops an ACS instance.
Performs a backup of an ACS configuration.
Enters the ACS Configuration mode.
Installs and removes ACS patches.
Resets the ACS configuration to factory defaults.
Performs a restoration of an ACS configuration.
Gathers information for ACS troubleshooting.
Backs up the system (ACS and ADE OS) and places the backup in a
repository.
Backs up system logs.
Defines the local debug logging level for the ACS components.
Restores to the default local debug logging level of the ACS
components.
Synchronizes the secondary ACS database to the primary ACS
database.
Restores from backup the file contents of a specific repository.
Shows the debug log level status for subsystems (enabled or disabled).
Displays ACS server debug logs.
Shows application status and version information.
Displays information about the software version of the system.
Appendix A ACS Command Reference
OL-18996-01