Stop. You Have Completed This Procedure - Cisco ONS 15454 ETSI Manual

NTP- G9 Open the Front Cabinet Compartment (Door)

Stop. You have completed this procedure.

DLP-G9 Open the Front Cabinet Compartment (Door)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note The ONS 15454 shelf assembly has an ESD plug input and is shipped with an ESD wrist strap. The ESD
plug input is located on the outside of the shelf assembly on the right side. It is labeled "ESD" on the
top and bottom. Always wear an ESD wrist strap and connect the strap to the ESD plug when working
on the ONS 15454.
Open the front door lock.
Step 1
The ONS 15454 shelf assembly comes with a pinned hex key for locking and unlocking the front door.
Turn the key counterclockwise to unlock the door and clockwise to lock it.
door of the ANSI shelf.
Cisco ONS 15454 DWDM Procedure Guide, R8.0
1-22
This task opens the front door.
Pinned hex (Allen) key
NTP-G2 Install the Shelf Assembly, page 1-8
Required
Onsite
None
Chapter 1 Install the Shelf and Common Control Cards
Figure 1-9 illustrates the front
78-17704-02