Show Debug-Log; Show Debug-Adclient - Cisco CSACS-1121-K9 Reference Manual

ACS Configuration Commands
Usage Guidelines None.
Examples
acs/admin(config-acs)# show debug-adclient
Active Directory client debug is disabled
Related Commands Command
debug-adclient
debug-log
debug-log

show debug-adclient

show debug-log

To display the local debug logging status for all components or for specific ACS components, use the
show debug-log command in the ACS Configuration mode. Any user, irrespective of role, can issue this
command.
Syntax Description component
all
Defaults No default behavior or values.
Command Modes ACS Configuration
Usage Guidelines
You can select any of the following (including the suboptions) as a component:
•
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-110
show debug-log [component | all]
Selects local debug logging on the components you want, where component
can be any of the components described in the Usage Guidelines.
Displays the currently configured local debug logging status for all
components.
runtime—If you select this component, all other runtime subcomponents are included; see runtime-
items in the list below:
– runtime-admin
– runtime-authenticators
runtime-authorization
–
runtime-config-manager
–
runtime-config-notification-flow
–
runtime-customerlog
–
runtime-crypto
–
Description
Enables debug logging for an Active Directory client.
Disables debug logging for an Active Directory client.
Defines the local debug logging level for the ACS components.
Shows the debug log level status for subsystems (enabled or disabled).
Appendix A ACS Command Reference
OL-18996-01