Show Logging - Cisco CSACS-1121-K9 Reference Manual

Show Commands
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines
None.
Examples
acs/admin# show interface
NAME: "CSACS1120-K9
PID: CSACS1120-K9
Total RAM Memory: 4149500 kB
CPU Core Count: 2
CPU 0: Model Info: Intel(R) Core(TM)2 CPU
CPU 1: Model Info: Intel(R) Core(TM)2 CPU
Hard Disk Count(*): 2
Disk 0: Device Name: /dev/sda
Disk 0: Capacity: 250.00 GB
Disk 0: Geometry: 255 heads 63 sectors/track 30401 cylinders
Disk 1: Device Name: /dev/sdb
Disk 1: Capacity: 250.00 GB
Disk 1: Geometry: 255 heads 63 sectors/track 30401 cylinders
NIC Count: 2
NIC 0: Device Name: eth0
NIC 0: HW Address: 00:15:17:59:73:81
NIC 0: Driver Descr: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connect
ion
NIC 1: Device Name: eth1
NIC 1: HW Address: 00:15:17:59:73:82
NIC 1: Driver Descr: e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connect
ion
(*) Hard Disk Count may be Logical.
acs/admin#

show logging

To display the state of system logging (syslog) and the contents of the standard system logging buffer,
use the show logging command in the EXEC mode.
Syntax Description application
internal
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-76
chassis", DESCR: "CSACS1120-K9
, VID: V01 , SN: CAM12345678
show logging {application [application-name]} {internal} {system} |
Displays application logs.
application-name—Application name. Up to 255 alphanumeric characters.
Displays the syslogs configuration.
tail—Tail system syslog messages.
–
count—Tail last count messages. From 0 to 4,294,967,295.
–
|—Output modifier variables (see below).
Appendix A ACS Command Reference
chassis"
6400 @ 2.13GHz
6400 @ 2.13GHz
OL-18996-01