Backup; Application Upgrade - Cisco CSACS-1121-K9 Reference Manual

EXEC Commands
Do not issue the backup or restore commands when the upgrade is in progress. This might cause the
Caution
database to be corrupted.
Examples
acs/admin# application upgrade acs myremoterepository
acs/admin#
Related Commands Command
application install
application remove
application start
application stop
show application

backup

To perform a backup (including the ADE OS data) and place the backup in a repository, use the backup
command in the EXEC mode.
Syntax Description
backup-name
repository
repository-name
Defaults No default behavior or values.
Command Modes
EXEC
Usage Guidelines Performs a backup of ACS and ADE OS data and places the backup in a repository.
When you are using this command for ACS, the backup files include:
•
•
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-28
backup backup-name repository repository-name
Name of backup file. Up to 100 alphanumeric characters.
Repository command.
Location where the files should be backed up to. Up to 30 alphanumeric
characters.
Database—Database files include data related to ACS as well as the ADE OS. You can view backup
files of the ADE-OS at:
/storedconfig
–
/storeddata
–
Database password file—dbcred.cal, located at /opt/CSCOacs/conf.
Description
Installs an application bundle.
Removes or uninstalls an application.
Starts or enables an application.
Stops or disables an application.
Shows application information for the installed application packages
on the system.
Appendix A ACS Command Reference
OL-18996-01