Navigating the CLI Commands
Table 2-1
Command
acs/admin(config-GigabitEthernet)# ip address 172.16.0.1 ?
<A.B.C.D>
acs/admin(config-GigabitEthernet)# ip address 172.16.0.1
acs/admin(config-GigabitEthernet)# ip address 172.16.0.1
255.255.255.224 ?
<cr>
acs/admin(config-GigabitEthernet)# ip address 172.16.0.1
255.255.255.224
Navigating the CLI Commands
This section describes how to navigate the commands and modes on ACS.
•
•
•
Getting Help
Use the question mark (?) and the arrow keys to help you enter commands:
•
•
CLI Reference Guide for the Cisco Secure Access Control System 5.1
2-10
Command Options for Configuration Submodes (continued)
Network mask
Carriage Return
Getting Help, page 2-10
Using the No and Default Forms of Commands, page 2-11
Command-Line Conventions, page 2-11
For a list of available commands, enter a question mark (?):
acs/admin# ?
To complete a command, enter a few known characters before ? (with no space):
acs/admin# s?
Chapter 2
Using the ACS Command Line Interface
Comment
Enter the keyword or
argument that you want to
use. This example uses the
172.16.0.1 IP address.
Enter ? to display what you
must enter next on the
command line. In this
example, you must enter a
network mask.
A carriage return <cr> does
not display; therefore, you
must enter additional
arguments to complete the
command.
Enter the network mask.
This example uses the
255.255.255.224 IP
address.
Enter ? to display what you
must enter next on the
command line. In this
example, you can press
Enter.
A carriage return <cr>
displays; you can press
Enter to complete the
command.
OL-18996-01