Cisco CSACS-1121-K9 Reference Manual page 104

Show Commands
Status
Running
Execution Failed
Not Monitored
Restarting
Initializing
Examples
Example 1
acs/admin# show application
<name>
acs
acs/admin#
Example 2
acs/admin# show application version acs
Cisco ACS VERSION INFORMATION
-----------------------------
Version :
Release :
acs/admin#
Example 3
acs/admin# show application status acs
ACS role: PRIMARY
Process 'database'
Process 'management'
Process 'runtime'
Process 'view-database'
Process 'view-jobmanager'
Process 'view-alertmanager'
Process 'view-collector'
Process 'view-logprocessor'
acs/admin#
Example 4
acs/admin# show application status acs
ACS role: PRIMARY
"ACS is busy applying a recent configuration change
requiring enabling/disabling of processes.
Status is unavailable.
Please check again in a minute."
acs/admin#
This message appears when a set of processes change because of a view node selection or Active
Directory configuration.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-66
Description
When the application is in running state.
When the process has failed to start but still trying to start the process.
After watchdog failed to start the process as configured.
When either the process cannot be found or the process ID file is missing
and the watchdog restarts the process.
Intermediate state when the watchdog comes up or watchdog starts again to
monitor a process. This is shown also when any of the processes has failed
to pass the active test.
<Description>
ACS 5.1
5.1.0
100
running
running
running
running
running
running
running
running
Appendix A ACS Command Reference
OL-18996-01