Restore; Reload - Cisco CSACS-1121-K9 Reference Manual

Appendix A ACS Command Reference
If you get any of these warnings, enter
If no processes are running when you use the reload command or you enter
warning message displayed, ACS asks you to respond to the following option:
Do you want to save the current configuration ?
Enter
Saved the running configuration to startup successfully
Examples
acs/admin# reload
Continue with reboot? [y/n] y
Broadcast message from root (pts/0) (Tue Oct
The system is going down for reboot NOW!
acs/admin#
Related Commands Command
halt

restore

To perform a restore of a previous backup, use the restore command in the EXEC mode. A restore
operation restores data related to ACS as well as the ADE OS. To remove this function, use the no form
of this command.
Syntax Description filename
repository-name
Defaults
No default behavior or values.
Command Modes
EXEC
Usage Guidelines When you use this command for ACS, the ACS server restarts automatically.
OL-18996-01
to save the existing ACS configuration. ACS displays the following message:
YES
restore filename repository repository-name
Name of the backed-up file that resides in the repository. Up to 120
alphanumeric characters.
Note
Name of the repository you want to restore from backup.
to halt the operation, or enter
YES
7 23:01:46 2008):
Description
Disables the system.
You must add the .tar.gpg extension after the filename (for example,
myfile.tar.gpg).
CLI Reference Guide for the Cisco Secure Access Control System 5.1
EXEC Commands
to cancel the halt.
NO
in response to the
YES
A-47