Troubleshooting Warning Messages - Minolta PS7000 Operator's Manual

Troubleshooting warning messages

Warning message
Bind Size is Too High
Press Down Book Table
Bind Size is Not Detected
Reset Book or Change Sheet
Book Exp. level is Too High
Set AE to off
Book Size is Not Detected
Reset Book or Change Sheet
Possible cause
• The height of the surface of
the original is more than 65
mm above the book table.
• The steel mirror is dirty.
• Light from the room lighting
or the outside through
windows reflects on the steel
mirror.
• Change settings appropriately for the original, referring to "Notes on
originals".
• A tag or bookmark is attached
to the original.
• Indices are provided on the
top of the original.
• The steel mirror is dirty.
• The hardcover has patterns.
• Light reflects on the
hardcover.
• Change settings appropriately for the original, referring to "Notes on
originals".
• The density of the original
surface is too high.
• The original is not correctly
set.
• No original is set.
• A tag or bookmark is attached
to the original.
• Indices are provided on the
top of the original.
Action
• Lower the original so that its
surface is within the range 65 mm
above the book table.
• Select Sheet mode.
• Clean the steel mirror.
• Relocate the Scanner to a place
where light from the room
lighting or the outside through
windows does not reflect on the
steel mirror.
• Take off tags and bookmarks.
• Set the original upside down.
• Set the original upside down.
• Set the distance between the
stopper and the original in Book
mode.
• Select Sheet mode.
• Clean the steel mirror.
• When the mode is Book mode, set
the distance between the stopper
and the original.
• Cancel the setting for auto
exposure.
• Turn off Frame Masking.
• Select Sheet mode.
• Change settings appropriately for
the original, referring to "Notes
on originals".
• Set the original correctly.
• Take off tags and bookmarks.
• Select the Sheet mode and cancel
the Auto function.
• Set the original upside down.
5-2