Turning The Scanner On And Off; Turning On - Minolta PS7000 Operator's Manual

3-3

Turning the Scanner ON and OFF

Turning on

Check that the Scanner is connected
1
to the printer with the printer
interface cable, and turn the power
switch on (" I " position).
NOTE
Turn on the printer before turning on the Scanner. If the Scanner is turned on before the
printer, an error message appears on the display. However, you can still turn the printer on
at this time.
[Welcome to PS7000. Initializing]
2
appears on the display and the start
key turns red. The Scanner can be
operated when the start key turns
green.
NOTE
When the printer interface cable is not connected properly, an error message appears on
the display.
When the message [Start Appli./Driver] appears on the display, change the [Connect]
setting in [Initial] to [Printer] in Utility mode. Refer to page 3-46 for details.
Start key