Precautions When Operating The Printer; Moving The Printer - Minolta PS7000 Operator's Manual

1-5
Operation

Precautions when operating the printer

Observe the following precautions to ensure the optimum performance of the printer.
! NEVER place a heavy object on the printer or apply excessive pressure to the printer.
! NEVER turn the power switch off during operation.
! NEVER use any flammable sprays/liquids near the printer.
! NEVER place a vase or vessel containing water on the printer.
! NEVER drop paper clips, staples, or other small pieces of metal into the printer. If this
occurs, contact your authorized Dealer.
! NEVER place the printer or the cabinet on the power cord or interface cables of other
electrical equipment.
! NEVER leave a damaged or cracked power cord or interface cable unrepaired. If any of
these conditions are found, immediately shut down the printer, unplug the power cord,
and call your authorized dealer for appropriate action.
! ALWAYS completely insert the power cord plug into the power outlet.
! ALWAYS make sure that the outlet into which the power cord plug is inserted is visible.
! ALWAYS be sure to turn the power switch off, unplug the power cord, and call your
authorized dealer for appropriate action when the printer becomes excessively hot or pro-
duces abnormal noise.

Moving the printer

When moving the printer, observe the following.
! The printer body weighs about 25 kg excluding expendables. Be careful not to hurt your
back or waist. Do not carry the Printer alone but with your mate or mates.
! When moving or transporting the printer, be sure to remove the imaging cartridge before-
hand.