Scsi Port Settings - Minolta PS7000 Operator's Manual

3-53
Operations in Utility mode

SCSI port settings

The ID number for SCSI port recognition is set. All settings defined here are effective not
only for the current operation but also when the Scanner is turned on next.
Select [SCSI set] on the main Utility
1
screen. The SCSI setting screen
appears.
Select [Up] or [Down] to change the
2
ID number from 0 to 7.
Select [Previous] to return to the
main Utility screen.
Select [OK] to define the setting.
NOTE
Do not set any ID number which has already been used for other SCSI unit. If any of the
SCSI ID numbers is changed, turn off the powers to the Scanner and the connected PC.
Then, turn them on, and the ID numbers have been changed accordingly.
Select Function
Init Time Caut
ial set ion
Set SCSI ID
Down Up
SCSI Main
set Menu
ID=2
Prev
OK
ious