Sheet Mode - Minolta PS7000 Operator's Manual

Pr version book scanner
Hide thumbs Also See for PS7000:
Table of Contents

Advertisement

3-11
Book/Sheet modes

Sheet mode

Select this mode if an error message
appears or a clear image cannot be obtained
in Book mode, or when scanning thin
materials (newspapers, photographs,
documents, etc.) or a solid surface other
than a book.
NOTE
Text is selected for the Image mode by default. It is recommended that this be changed to
Photo when scanning photographs.
When Sheet mode is selected, the focal
point can be set to be within a range from 0
to 50 mm above the book table in 6 steps in
10 mm increments. When scanning a solid
surface, adjust the original (solid surface)
height in Sheet mode.
Cancel of the Auto function
In the Sheet mode, the scan time can be shortened by disabling the preliminary scanning for
auto detection. Set each function as follows to cancel the Auto function.
• Expo (Manual)
• Zoom (Fixed magnification)
• Cent Eras (OFF)
• Masking (OFF)
• Fing Mask (OFF)
• Centerin (OFF)
• Org. type (Normal or Glossy)
0 to 50 mm

Advertisement

Table of Contents
loading

Table of Contents