Hp Dss V.; Licensing - HP T1936AA - Digital Sending Software Support Manual

The main purpose of the ABM is to give the administrator a way to create and change the e-mail
address books stored in the HP Digital Sending Software. You must be an administrator to use
the ABM.
Specifically, you use the ABM to accomplish the following:
To open the Address Book Manager:
1
2
ABM must be installed separately. Insert the HP DSS application CD, browse to the "ABM" folder and
Note
run "Setup.exe".
3
4
4

HP DSS v.

Trial License Period
When the HP Digital Sending Software is installed for the first time, the software will be fully
functional in trial mode for a set period of time. The License section of the HP MFP DSS
Configuration Utility will display a "Trial License" entry. The remaining trial period is displayed in
this entry.
When the trial period expires, the software becomes inactive until a valid license is installed. All
HP MFP DSS Configuration Utility settings are retained, allowing the configuration used during
the trial period to be reactivated.
Licenses
In order to use the features of this version of the DSS, you must install at least one workflow
Process and Document Management license (licenses can be purchased from your local
Hewlett-Packard Sales Representative). These licenses comes in 1, 5, 10, 50, and 250 seat
varieties. Each seat allows you to enable DSS features on one MFP device.
You can install as many licenses as you want in order to accumulate seats, but 250 is the recommended
Note
limit. If, by removing a license, your total number of seats falls below the number of MFPs you currently
have configured for digital sending features, you will be required to remove MFPs from the MFP list
until you no longer have more digital-sending-configured MFPs than you have seats
Node locking
Purchased Workflow Process and Document Management licenses can only be applied to a
specific DSS
DSS server. The unique ID is displayed on the About tab of the HP MFP DSS Configuration
Utility as the MAC Address. This ID is displayed during and after the trial license period.
To activate your license certificate, record the "MAC Address" from the About tab of your DSS
server and proceed to www.software.hp.com.
ENWW
View, add, change, and delete information in the public address books
View, add, change, and delete information in the private address books of authenticated
users
From your computer, click Start, and then point to Programs. Point to Hewlett-Packard, and
then click HP Address Book Manager. The Address Book Manager window appears.
In the Digital Sender name field, type the DNS name or IP address for the HP DSS server,
or choose a previously entered DNS name or IP address from the drop-down list.
In the User name field, type ADMINISTRATOR.
In the User password field, type your password (if one is required) and click OK. If all of the
information is valid, the ABM main window appears.

licensing

server. This process combines the license certificate with a unique ID from the
4
HP DSS v. licensing 19
4