Hp Mfp Dss Configuration Utility Messages - HP T1936AA - Digital Sending Software Support Manual

HP MFP DSS Configuration Utility messages

The following table lists and explains messages that might appear on the screen while you are
using the HP MFP DSS Configuration Utility.
If the problem persists, contact an authorized HP dealer.

HP MFP DSS Configuration Utility messages

Message
<computer network name> is
not responding or is not a
valid SMTP gateway server.
Access violation Read
access is denied.
Access violation Unable
to log off from the file
server.
Access violation Unable
to log on to the file
server.
Access violation Write
access is denied.
The account for user <user
name> is currently
inaccessible.
The domain <domain name>
is unknown.
The HP Configuration
Utility is already being
run on <computer network
name>.
The LDAP server is
currently too busy to
handle your request.
The LDAP server or the
connection has failed.
36 Chapter 3 - Troubleshooting
Description and actions
The named computer is either not currently running, not available
through the network, or not running as an SMTP gateway.
Make sure the computer is turned on, available through the network,
and running as an SMTP gateway.
The HP MFP DSS Configuration Utility could not read from the specified
folder on the specified file server.
Make sure the folder exists.
Make sure you have read permission for the folder.
The HP MFP DSS Configuration Utility could not logoff from the
specified file server.
Try testing the file server again to make sure that it is still running
and available through the network.
The HP MFP DSS Configuration Utility could not logon to the specified
file server.
Make sure you entered valid logon credentials to gain access to the
file server.
Make sure the file server is running (if not the local computer).
Make sure the file server is available through the network (if not the
local computer).
The HP MFP DSS Configuration Utility could not write to the specified
folder on the specified file server.
Make sure the folder exists.
Make sure you have write permission for the folder.
The named user does not currently have logon privileges—either
because the account is locked or the user password has expired.
Unlock the user account.
Update the user password.
The named domain is not recognized as valid.
Make sure the named domain is correct.
Make sure your computer can gain access to the named domain.
The HP MFP DSS Configuration Utility is already running remotely on
the named computer. More than one instance of the HP MFP
DSS Configuration Utility cannot run at the same time. This eliminates
the possibility of configuration conflicts.
Wait until the HP MFP DSS Configuration Utility that is running
remotely is closed.
The LDAP server ended the connection with the HP MFP DSS
Configuration Utility because resources were insufficient.
Test the LDAP settings again later.
The HP MFP DSS Configuration Utility lost its connection with the LDAP
server.
Make sure the LDAP server is working properly.
Test the LDAP settings again later.
ENWW