Ni-Mh Battery Cartridge Alone - Denso BHT-6000 User Manual

5.5.2 Ni-MH Battery Cartridge Alone

The CU-6001 can charge Ni-MH battery cartridges in either of the following two ways:
- Fully discharging and then charging*
- Charging only
To select [ 1 ], first power on the CU-6001 and then load a Ni-MH battery cartridge into
it. To select [ 2 ], first load a Ni-MH battery cartridge into the CU-6001 and then power
it on.
WARNING
CAUTION
[ 1 ]
[ 2 ]
* Fully discharging and then charging batteries
can prevent "Memory Effect" as described at
the beginning of Section 5.5.
• Never use the CU-6001 for charging anything
other than the specified battery cartridges.
Doing so could cause heat, battery-rupture, or
fire.
Handling the battery cartridge
• Never charge a wet or damp Ni-MH battery
cartridge.
Doing so could cause the batteries to break,
generate heat, rupture, or burn.
• Do not insert or drop foreign materials such as
metals or anything inflammable through the
openings (vents or battery cartridge slot) into
the CU-6000.
Doing so could result in a fire or electrical shock.
141
Chapter 5. Handling the CU-6000 (Option)
Ni-MH battery
cartridge