Denso BHT-6000 User Manual page 138

Reload the
battery
to restart!
XXXXXX
Reload the
battery
to restart!
XXXXXX
Flash ROM error!
Contact your
administrator.
System Program malfunction
Problem
During execution of System Program, the System
Program has attempted to write onto the write-
protected area of the RAM.
01
(xxxxxx: Error address)
Solution
Unload and reload the dry batteries or the battery
cartridge, then turn on the power.
Problem
During execution of System Program, the System
Program has received an invalid command code.
(xxxxxx: Error address)
02
Solution
Unload and reload the dry batteries or the battery
cartridge, then turn on the power.
Flash ROM error
Problem
The system has failed to write onto the flash ROM.
If this error occurs, the BHT-6000 beeps five
NOTE
times (for 0.1 second per beep) and then turns
itself off.
Solution
Turn on the power again. If this error occurs fre-
quently, contact your nearest dealer.
123
Chapter 4. Error Messages