Denso BHT-6000 User Manual page 65

(1) Transmission speed screen
SET SPEED
< OPTICAL >
1: 2400 4: 38400
2: 9600 5: 57600
3:19200 6:115200
(2) IR beam output pulse width screen
SET PULSE WIDTH
< OPTICAL >
1:1.63us
2:3/16 Bit Time
(3) Communications protocol option menu
SET PROTOCOL
< OPTICAL >
1:SERIAL No.
2:H.PARITY
3:LINKUP TIME
4:FIELD SPACE
Selecting "1:TRANSMIT SPEED" on the SET OPTI-
CAL screen calls up the screen shown at left.
Select the desired transmission speed by using
the numerical keys or F5 and F6 keys, and then
press the ENT key.
To return to the SET OPTICAL screen, press the C
key.
Selecting the "2:PULSE WIDTH" on the SET OPTI-
CAL screen calls up the screen shown at left.
1 1.63us: 1.63 µs
2 3/16 Bit Time: 3/16 bit time
Select the desired pulse width by using the nu-
merical keys or F5 and F6 keys, and then press
the ENT key.
To return to the SET OPTICAL screen, press the C
key.
Selecting "3: PROTOCOL" on the SET OPTICAL
screen calls up the screen shown at left.
1 SERIAL No.:
2 H. PARITY:
3 LINKUP TIME:
4 FIELD SPACE:
Select a desired screen by using the numerical
keys or F5 and F6 keys, and then press the ENT
key.
To return to the SET OPTICAL screen, press the C
key.
If the BHT-Ir protocol has been selected, the
NOTE
serial number and horizontal parity settings
will be ignored.
50
Switches to the serial number
ON/OFF screen.
Switches to the horizontal
parity ON/OFF screen.
Switches to the timeout
length screen.
Switches to the space code
handling screen.