Denso BHT-6000 User Manual page 38

(3) Selecting the English or Japanese message version
SELECT MESSAGE
1:JAPANESE
2:ENGLISH
(4) During initialization
INITIALIZE
**Initializing**
(5) Completion of initialization
INITIALIZE
** Completed **
Do not power off the BHT-6000 until the above initialization completion screen
NOTE
appears. A too-early powering-off will interrupt initialization, requiring you to
initialize the BHT-6000 again.
If the message "System error! Contact your administrator. Note the error drive.
NOTE
(DRIVE X)" appears as shown on page 20 although the initialization has com-
pleted, initialize the BHT-6000 again.
If you initialize the BHT-6000 after downloading user programs and data, all of
NOTE
those programs and data stored in the target memory area will be lost. Download
them again if necessary.
Initialization will restore the LCD contrast level (refer to Subsection 2.4.3), com-
NOTE
munications conditions and other settings to the default values, so modify them if
necessary. After initialization, be sure to set the calendar clock (refer to [ 2 ]).
Chapter 2. Getting Started the BHT-6000 and System Mode
Preceding the execution of initialization, the mes-
sage version selection screen will appear as shown
at left.
1 JAPANESE : Switches the message version to
Japanese.
2 ENGLISH : Switches the message version to
English.
Select a desired item by using the numerical keys,
then press the ENT key. The BHT-6000 starts
initialization.
During initialization, the screen shown at left is
displayed.
Upon completion of the initialization, the BHT-6000
displays the screen shown at left for a second and
turns itself off automatically.
23