Errors In System Mode - Denso BHT-6000 User Manual

4.2 Errors in System Mode

If some error occurs during operation in System Mode, one of the following error
messages will appear on the LCD.
EXECUTE PROGRAM
****************
*NO FILE EXISTS*
****************
SET EXEC PROGRAM
****************
*NO FILE EXISTS*
****************
UPLOAD FILE
(A:)
****************
*NO FILE EXISTS*
****************
When selecting a program file or data file
Problem
You attempted to execute a user program in the
EXECUTE PROGRAM menu, even though no user
program files had been stored in the memories.
Solution
Press the C key to return to the SYSTEM MENU
screen, then download user programs. (Refer to
Chapter 2, Subsection 2.5.3, [ 2 ].)
Problem
In the SET SYSTEM menu, you attempted to select
a user program file as an execution program to be
run when the power is applied, even though no
user program files had been stored in the memo-
ries.
Solution
Press the C key to return to the SYSTEM MENU
screen, then download user programs. (Refer to
Chapter 2, Subsection 2.5.3, [ 2 ].)
Problem
You attempted to select the RAM or flash ROM for
uploading in the UPLOAD menu, even though no
data files had been stored in the selected memory.
Solution
Press the C key to return to the SYSTEM MENU
screen.
126