Connecting Video Components - Denon AVR-5803 Operating Instructions Manual

Connecting video components

• To connect the video signal, connect using a 75
• When making connections, also refer to the operating instructions of the other components.
TV or DBS tuner
AUDIO
VIDEO
OUT
R L OUT
R L
AUDIO
VIDEO
OUT
R L OUT
L
R
Connecting a video disc player VDP
VDP
• Connect the video disc player's video output jack (VIDEO OUTPUT) to the
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO
OUTPUT) to the
• A DVD player can be connected to the DVD jacks in the same way.
• It is also possible to connect a video disc player, DVD player, video camcorder,
game machine, etc., to the V.AUX jacks.
Note on connecting the digital
input jacks
• Only audio signals are input to the
digital input jacks. For details, see
page 7.
LD player or other component equipped
with a Dolby Digital RF output jacks
NOTES:
Video output connections for LD players equipped with Dolby Digital-RF (AC-3 RF) output jacks.
• To connect an Dolby Digital AC-3 compatible LD player to the Dolby Digital-RF (AC-3 RF) jacks,
connect the player's video outputs to this unit's VDP input jacks.
• When the Dolby Digital-RF (AC-3 RF) input selector button on the AVR-5803 is pressed, the
picture switches to the signals input to the VDP input jacks.
Connecting a video decks
• There are three sets of video deck (VCR) jacks, so three video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
(yellow) VCR-1 OUT jack using 75
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the
OUT jacks using pin plug cords.
Connect the another video deck to the VCR-2 or VCR-3 jacks in the same way.
8
/ohms video signal cable cord. Using an improper cable can result in a drop in picture quality.
Connecting a TV/DBS tuner
TV/DBS
• Connect the TV's or DBS tuner's video output jack (VIDEO OUTPUT) to the
75 /ohms video coaxial pin plug cord.
• Connect the TV's or DBS tuner's audio output jacks (AUDIO OUTPUT) to the
cords.
LD player, CDV player, etc.
(yellow) VDP IN jack using a 75
VIDEO
AUDIO VDP IN jacks using pin plug cords.
DVD
IN
Y P /C
B B
CONPONENT VIDEO
MULTI ZONE DVD VDP TV
1
VIDEO
OUT
S-VIDEO
R
CD DVD VDP TV
L
L
R
R
SURR.
PHONO FRONT CENTER SURR. BACK
L
R
SW
IN EXT. IN-1
DOLBY DIGITAL RF
DENON
IN
LINK
1 2
EXT. IN
ROOM TO ROOM POWER AMP
(REMOTE CONTROL)
CONTROL OUT
RS-232C
IN OUT
LD player or other component
equipped with digital output jacks
RF OUT
/ohms video coaxial pin plug cords.
/ohms video coaxial pin plug cord.
TV DBS / SAT MONITOR
IN IN
P /C Y P /C P /C Y P /C P /C Y P /C P
R R B B R R B B R R B B
DBS / V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3 MONITOR
SAT 1
IN OUT OUT
L
AUDIO
IN OUT IN
DBS / CDR /
V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3
SAT TAPE-1 TAPE-2
L
L
R
R
SURR. SURR. CDR /
R
R
FRONT CENTER SURR. BACK FRONT CENTER SURR. BACK TAPE-1 TAPE-2
L
L
SW SW
EXT. IN-2 PRE OUT OUT
IN
3 4 5
COAXIAL
1 2 3 4 5 6
OPTICAL
TRIGGER OUT
DC 12V 20mA MAX.
DIGITAL
COAXIAL OPTICAL
OUTPUT
(yellow) VCR-1 IN jack, and the video deck's video input jack (VIDEO IN) to the
VIDEO
AUDIO VCR-1 IN jacks, and the video deck's audio input jacks (AUDIO IN) to the
(yellow) TV/DBS IN jack using a
VIDEO
AUDIO TV/DBS IN jacks using pin plug
VIDEO
IN
Connecting a monitor TV
MONITOR OUT
• Connect the TV's video input
jack (VIDEO INPUT) to the
using a 75
coaxial pin plug cord.
• The monitor TV can also be
connected in the same way
to the VIDEO MONITOR
OUT-2 jack.
OUT
/C
R R
FRONT
L
2
SURR.-A
L
AC IN
SURR.-B
L
SURR.
BACK
L
MD /
MULTI
L
ZONE 2
L
R
SPEAKER IMPEDANCE
FRONT, CENTER, SURR. BACK
MD / MULTI ZONE
MULTI ZONE 2 A + B / 6 16
1 2
SURROUND A OR B / 6 16
L A + B / 8 16
SPEAKER SYSTEMS
R
PREOUT OUT
OUT
SWITCHED TOTAL 120W (1A.) MAX.
AC 120V 60Hz
AC OUTLETS
5 6
Video deck 2
R
R
Video deck 1
R
R
Monitor TV
MONITOR OUT jack
VIDEO
/ohms video
L R L
L R L OUT IN
OUT IN
VIDEO
AUDIO
L R L
L R L OUT IN
OUT IN
VIDEO
AUDIO
VIDEO
AUDIO VCR-1