ENGLISH
Advanced Setup – Part 1
1
2
3
4
• "Base Curve Copy" is displayed after performing the Auto
Setup.
2 Manually adjusting the room equalizer's
"Flat" correction curve set with the auto
setup procedure
1
D D H H
Press
to select "Base Curve Copy", then
F F
press
.
2
F F
Press
to select "Yes", then press
• The type of the copied correction curve is displayed in the
upper right of this screen.
1
2
Option Setup
Setting the Power Amplifier Assignment
To suit your preference, a surround back channel's power
amplifier can be assigned to the front channel ("Front A" or
"Front B") for bi-amp playback, ZONE2.
1
D D H H
Press
to select "Option Setup", then press
ENTER
.
2
D D H H
Press
to select "Power Amp Assign", then
ENTER
press
.
3
F F G G
Press
to set.
S. Back:
The surround back speakers are used in MAIN ZONE.
Front A, Front B:
This provides a bi-amp mode for the 2 main front speakers,
replicating the front A or front B amplifier channel's outputs.
ZONE2:
This mode assigns the surround back amplifier channels to
provide ZONE2 speaker-level outputs from the surround back
speaker terminals.
4
ENTER
Press
.
ENTER
.
1
54
ENGLISH
Advanced Setup – Part 1
2
3
Front Bi-Amp connections
Dynamic sound with a range wider than that of full range
systems can be played by connecting bi-amp compatible
speakers to the AVR-2807. Be sure to consult the owner's
manual of your bi-amp-capable speakers for further
information before proceeding.
SPEAKER
[L]
NOTE:
• When making bi-amp connections, be sure to remove
the short-circuiting bar included with the speaker.
AVR-2807