Advanced Playback; Setting The Audio Delay; Setting The Auto Surround Mode - Denon AVR-886 Operating Instructions Manual

Advanced Setup – Part 1

Advanced playback

Setting the Audio Delay

• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
• The audio delay setting is stored separately for each input
source.
1
CURSOR D D H H
Press the or
"Advanced Playback" at the "System Setup"
ENTER
menu, then press the button.
• The "Advanced Playback" menu appears.
2
CURSOR D D H H
Press the or
"Audio Delay", then press the
• The "Audio Delay" screen appears.
3
CURSOR F F G G
Press the or
delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that the
movement of the actors' lips is synchronized with the
sound.
4 ENTER
Press the button to enter the setting.
• The "Advanced Playback" menu appears.
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct mode, pure direct or
stereo mode (TONE DEFEAT "ON").
button to select
button to select
ENTER
button.
button to set the
The surround mode used last for the three types of input signals
shown below is stored in the memory, and the signal is
automatically played with that surround mode the next time it is
input.
Note that the surround mode setting is also stored separately for
the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals in the Dolby Digital, DTS or another multi-
e Multi-channel signals in the Dolby Digital, DTS or another
1
2
3
4
44
ENGLISH
Advanced Setup – Part 1

Setting the Auto Surround Mode

channel format (DOLBY PL II x Cinema)
multi-channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround
mode does not change even if the input signal is changed.
CURSOR D D H H
Press the or button to select "Auto
Surround Mode" at the "Advanced Playback"
ENTER
menu, then press the button.
• The "Auto Surround Mode" screen appears.
CURSOR F F G G
Press the or button to select "ON"
if you want to use the auto surround mode, or
"OFF" if you do not want to use it.
ENTER
Press the button to enter the setting.
• The "Advanced Playback" menu appears.
CURSOR D D H H
Press the or
ENTER
"Exit", then press the button.
• The "System Setup" menu appears.
ENGLISH
button to select