In Case Of Router Connection(With Dhcp Server); Setup The Ip Address Pc And The Av Receiver/Amplifier; How To Setup The Auto Ip Address Of The Av Receiver/Amplifier; Power On The Av Receiver/Amplifier - Denon AVC-A1XV Operating Manual

The Operating Manual for DENON AV Receiver/Amplifier firmware update.

3.4 In case of Router connection(with DHCP Server).

3.4.1 Setup the IP address PC and the AV Receiver/Amplifier

Setup the IP Address at Auto IP mode.
1) Setup the auto IP address of PC.
2) Setup the auto IP address of the AV Receiver/Amplifier.
Refer to 3.4.2.

3.4.2 How to setup the auto IP address of the AV Receiver/Amplifier.

1) Keep to push the ' STANDARD ' button and the '9CH STEREO ' button on the AV
Receiver/Amplifier simultaneously. And turn on the power switch of
the AV Receiver/Amplifier.
2) Confirm the power indicator is green. If the power indicator is red, Make the power
indicator green pushing the ON/STANDBY button.
3) Push the
4) Select the
5) Push the CH SEL ENTER
6) Push the
7) Push the CH SEL ENTER
button.
8) Finish the

3.4.3 Power on the AV Receiver/Amplifier.

Operate the following. The AV Receiver/ Amplifier goes to the network setting mode.
1) Keep to push the ' STANDARD ' button and the '9CH STEREO ' button on the AV
Receiver/Amplifier simultaneously. And turn on the power switch of
the AV Receiver/Amplifier.
2) Confirm the power indicator is green. If the power indicator is red, Make the power
indicator green pushing the ON/STANDBY button.

3.4.4 Confirm IP Address of the AV Receiver/Amplifier.

Operate the following. Confirm IP Adress of the AV Receiver/Amplifier.
1) Push the SYSTEM SETUP button. You can see the
2) Select the
3) Push the CH SEL ENTER
4) Push the
5) Push the
6) Push the cursor DOWN button. You can confirm the IP Address.
7) Finish the
SYSTEM SETUP button. You can see the
Option Setup using cursor UP/DOWN button.
button. Select the "Network Setup" using cursor UP/DOWN button.
CH SEL ENTER button. You can see the "IP Address".
button. Setup the "DHCP : < OFF >" to <ON> using cursor LEFT/RIGHT
System Setup using the
Option Setup using cursor UP/DOWN button.
button. Select the "Network Setup" using cursor UP/DOWN button.
CH SEL ENTER button. You can see the "IP Address".
CH SEL ENTER button. You can see the "DHCP : < ON >" .
System Setup using the
D&M Holdings, INC.
System Setup
SYSTEM SETUP button.
System Setup
SYSTEM SETUP button.
Page 15 / 18
menu.
menu.