Lcd Panel; Inserting The Batteries; Changing The Batteries; Battery Check - Rollei PREGO 145 Instructions For Use Manual

Inserting the batteries

1. Open the battery compartment cover by pushing the
sliding part in the direction of the lens (Fig. 1)
2. Insert the batteries, making sure that the plus sign on
each battery points towards the battery compartment
cover (Fig. 2)
3. Close the cover so that it clicks into place.

Changing the batteries

1) Switch off the camera.
2) Change the battery as described in "Inserting the bat-
teries ".
Please note
• Only use CR2 batteries.
• If the batteries are taken out and put back when film is
loaded, this does not affect the position of the film.

Battery check

The battery power is checked auto-
matically every time the camera is
switched on.
If the battery is low, you'll see a
warning in the LCD panel.
• No display:
Battery power OK.
• Symbol half black:
Battery still OK for a few films.
Keep your spare batteries handy.
• Symbol flashes:
Insert new batteries
Note
• If you're taking photographs outside in cold weather,
keep the camera in your coat or jacket pocket to pre-
serve the battery life.
• Keep your spare batteries handy in cold weather
since batteries lose power at low temperatures . Bat-
teries recover at normal temperatures.
49