Site Requirements - Nokia IP100 Series Installation Manual

Site Requirements

IP100 Series Installation Guide
Before installing the unit, ensure that the location where you intend to
place the unit conforms to the environmental specifications listed in
APPENDIX A, Technical Specifications.
WARNING:
North America, the cord set may be optional. If a
cord set is not provided, use a power cord rated at
6A, 250V, maximum 3 meters long, made of HAR
cordage
country of end use.
WARNING:
battery is incorrectly placed. Replace only with the
same or equivalent type recommended by the
manufacturer. Dispose of used batteries according
to the manufacturer's instructions.
For NAPs intended for shipment outside
and IEC fittings
There is danger of explosion if the
Site Requirements
approved by the
9