Chapter 2: Using The Wbpn Wireless-N Bridge For Phone Adapters Configuration Utility; Logging In To The Configuration Utility - Cisco WBPN User Manual

Using the WBPN Wireless-N Bridge for Phone
Adapters Configuration Utility

Logging in to the Configuration Utility

Cisco WBPN User Guide
This chapter describes how to use the web-based configuration utility for the
WBPN Wireless-N Bridge for Phone Adapters. It contains the following sections:
• Logging in to the Configuration Utility
• Navigating through the Pages
• Viewing Status Information
• Configuring Wired Parameters
• Configuring Wireless Parameters
• Performing Administrative Tasks
To log in to the configuration utility, follow the instructions in
WBPN Using a PC. If you chose the WBPN to be assigned an IP address by DHCP,
or you changed the IP address to an address that is different from the default IP
address, you will need to use that new address to access the configuration utility.
2
Connecting the
19