Programming Destinations From Check Destination Screen - Ricoh Aficio MP 2500SPF Facsimile Reference Manual

E
Select [Program/Change] using {U} or {T}, and then press the {OK} key.
For the procedure to follow, see "Registering Addresses and Users for Fac-
simile/Scanner Functions", General Settings Guide.
Note
❒ You can also register programmed fax numbers, e-mail addresses, IP-Fax
destinations, and folder destinations in a group.
❒ When the facsimile initial display is shown, after changing the contents of
the Address Book, the "
dest./functions have been cancelled.
to bring up the facsimile's initial display.
❒ You can register in the Address Book using Web Image Monitor or Smart-
DeviceMonitor for Admin. For details about installation, see "Monitoring
and Configuring the Printer", Network Guide, or, for information about
the Address Book, see the relevant Help.
Reference
"Registering Addresses and Users for Facsimile/Scanner Functions", Gen-
eral Settings Guide
"Monitoring and Configuring the Printer", Network Guide

Programming Destinations from Check Destination Screen

This section explains how to register a directly entered fax number, e-mail ad-
dress, or IP-Fax destination to the Address Book using the Check Destination
screen.
If [Program] appears on the screen, it is possible to register a destination dis-
played on the check destination screen to the Address Book.
A
On the check destination screen, select the destination you want to register
to the Address Book.
B
Press [Program].
For details about registering destinations, see "Registering Addresses and
Users for Facsimile/Scanner Functions", General Settings Guide.
Programming Destinations in the Address Book
Settings have been updated. The selected
" message appears. Press [Exit]
1
65