Setup; Setup Menus - Dynacord DSP 600 Owner's Manual

4 Setup

The Setup menu allows access DSP 600's global parameters on the LCD screen. This is where preferences for many
functions can be set or adjusted. Pressing the
buttons to scroll through the Setup menu: Use the <SELECT> buttons to scroll to Setup parameters to make adjustments
using the VALUE up/down buttons.
CAUTION: To achieve optimum performance and guard against damage to the processor, your sound system or
yourself, please read, understand and follow all of the directions contained in this Owner's Manual.
Failure to do so may result in improper performance, loss or injury.

4.1 Setup Menus

NEW CONFIGURATION
The NEW CONFIGURATION window allows you creating a new, empty configuration for your system.
Press the Store button. Following dialog appears:
Use the up/down VALUE up/down buttons to chose the Destination Preset (U01 to U30) for the empty configuration.
Use the <SELECT> buttons to navigate to the Name parameter. Use the VALUE up/down buttons to select the field for
each letter / symbol character. The DSP 600 provides the complete ANSI character set, including lower-case & upper-
case letters, numerals and symbols. Pressing and holding the VALUE up/down buttons will scroll rapidly through the
character set. Press the < SELECT > buttons to move to the next or previous character position. Finish the name editing
by pressing the Store button. Following dialog appears:
Use the VALUE up/down buttons to choose between:
• 2 Way Stereo + FR
• 3 Way Stereo
• 4 Way + FR
• 5 Way + FR
• Free Configuration
• 3 Way Stereo-Mono Sub+FR
• 4 Way Stereo-Mono Sub/LF
See chapter Configurations on page 36 for more details. Press the Store button again to create the new configuration.
CAUTION: Before operating the sound reinforcement system, and any time a new preset is recalled, check the
configuration display to make sure that it is appropriate for your system and that connections to your
system are correct for the current configuration. Failure to do so could cause unexpected results or
damage to the system or its components.
PRESET RECALL
The DSP 600 allows the recall of presets by using external switches connected to the CONTROL PORT, see page 15.
This window allows the assignment of Presets to the pins of the CONTROL PORT.
button brings up the first Setup window. Use the VALUE up/down
Setup: NEW CONFIGURATION
Create new empty configuration
Press 'Store' to continue
Destination Preset: U25
Name: Default User Preset 1
Press 'Store' to continue
Config: 3-Way Stereo
Press 'Store' to continue
DSP 600
19