Dimensions; Specifications - Dynacord DSP 600 Owner's Manual

D
YNACORD

8 Specifications

Property
Mains Voltage
Power Consumption
Analog Audio Inputs
Digital Audio Inputs
Digital Audio Format
Nominal Input Voltage
Maximum Input Voltage (with -6dB PAD engaged)
Input Impedance
Common Mode Rejection
A/D Conversion
Analog Audio Outputs
Nominal Output Voltage
Maximum Output Voltage
Output Impedance
D/A Conversion
Frequency Response
THD+N
Dynamic Range
USB
Ethernet
Control Port
Sample Rate
Data Format
Internal Processing
Signal Processing
Operating Temperature Range
Dimensions (WxHxD)
Weight (Net)

8.1 Dimensions

134
100 to 240 V AC, 50 to 60 Hz
2 x XLR IN, electronically balanced
2 x XLR THRU OUT, electronically balanced
AES3, 32 kHz to 192 kHz sample rate
6 x XLR OUT, electronically balanced
< 0.002 % (band limited 22 Hz to 22 kHz)
USB Type B on front panel (PC Interface)
2 x RJ-45 ports, 100 MB, Integrated Switch
Software Configurable for Preset Recall
Parametric EQs, 31 band Graphic EQs, Delays, Routing, X-Over, 512 Taps FIR filters, PA limiter, TEMP limiter,
Level, Polarity, Signal generator
19 x 13.9 x 1.72 inch (483 x 356.1 x 43.6 mm)
Value
25 W
1 x XLR AES/EBU IN
1 x XLR AES/EBU THRU OUT
1.55 V / +6 dBu
17.3 V / +27 dBu
10 k
-85 dB @ 1 kHz (typical)
24-Bit Sigma-Delta
1.55 V / +6 dBu
8.7 V / +21 dBu
50 
24-Bit Sigma-Delta
20 Hz to 22 kHz (+/-0.5 dB)
116 dB (A-weighted)
1 x 6-pole Euro block
48 kHz
24-Bit
48-Bit Double Precision
0 °C to 40 °C
4.8 kg