Editing E-Mail Options; Editing Authentication Options - Kyocera KM-F1050 User Manual

Options
5
6

Editing E-mail Options

1
2
3
4
5
6
7

Editing Authentication Options

1
9-3
type the trap community name in the Trap Community text box. The default is
public.
If you want to start the trap server whenever the application is started, select
Automatically run trap server when the program starts. The default is for
the option to be cleared: to not allow the trap server to start automatically.
To save your settings and close the Options dialog box, click OK.
You can configure the application to send e-mail notifications to users about
certain device or counter conditions, such as cover open, paper jam, or counter
exceeding the limit. You can set the mail server, authentication, and sender for
the notifications.
In the menu bar at the top left of the screen, click Edit > Options. The Options
dialog box opens.
In the Options list, click Mail Settings.
In the Host text box, type the SMTP (e-mail) server name, and in Port, type the
port number.
To use authentication, select Require Authentication. In the User Name text
box, type the user name needed to log in to the SMTP server, and in
Password, type the user password needed to log in to the SMTP server.
In the Sender Name text box, type the name to show who the e-mail is from,
and in Sender Address, type the e-mail address to show what address the
e-mail is from.
To test the connection to the SMTP server, click Test Connection. A message
appears to indicate whether the application was able to successfully connect to
the SMTP server. If necessary, correct the host name and port number and test
the connection again.
Note: Test Connection does not check the validity of the user name and
password.
To save your settings and close the Options dialog box, click OK.
If a user does not have administrator rights on the computer with the application
installed, the network administrator can set up a user login password. If no
password has been set up for a user without administrator rights, the application
does not start, and an access error message appears.
In the menu bar at the top left of the screen, click Edit > Options. In the
Options dialog box, click Authentication.
User Guide