Automatic Device Discovery; Excluded Devices - Kyocera KM-F1050 User Manual

Automatic Device Discovery

Scheduling Automatic Device Discovery
1
2
3
4

Excluded Devices

Excluding a Device from Discovery
1
2
Including a Device
1
2
3
KMnet Viewer
Selected network segments list by selecting it and clicking Remove. Click
Next to continue through the wizard and select TCP/IP port, SNMP options,
SSL options, and discovery start time.
You can set up a regular schedule for performing the discovery process. If
devices are frequently added to or removed from the network, performing
discovery on a regular basis will keep the device database up to date.
You can set a schedule for device discovery.
Click Device > Discovery > Automatic Discovery. The Scheduled Discovery
dialog box opens.
If there is an existing discovery mode you would like to edit, select it and click
Properties, make your selections in each window to set up a recurring schedule
and click Apply changes.
Click Add to create a new discovery mode. In the Add Device Wizard, make
your selections in each window to set up a recurring schedule. On the Confirm
Discovery page, click Finish to save your changes.
The new discovery mode is added to the list. Click Close to save your changes
and close the Scheduled Discovery dialog box.
A printing device can be deleted, which excludes the device from the discovery
process. This may be done if the device is not managed by the central IT
department, or if the device is to be made not visible for security reasons.
Devices can be restored to the device list by performing Include device.
This option removes the device from the device list, and displays it in the
Excluded Devices window. Information about the device is not deleted from
the application.
In the device list, select the device to exclude.
Right-click on the selected device, and click Delete Device.
A printing device that was placed in the Excluded Devices window can be
included again. When a device is included, it is available to be found the next
time Discovery is performed.
Click Device > Discovery > Excluded Devices.
In the list, select an excluded device to include.
Click Include device.
Quick Start
1-3