Table of Contents
Advertisement
Setting Device Communications
1
2
3
4
TCP/IP Port
Setting the Port Number in Command Center
1
2
3
4
5-1
5 Communication Settings
Communication Settings control the network communications with each
device. Available settings vary depending on the model and can include
Network interface settings, Secure protocol settings, Login, and Account
Polling Settings, and Device Polling Settings.
If authentication is enabled, the Login user name and Password must be set
correctly in order to access several functions of the device, such as Address
Book, Users, or Document Box.
You can change the various communications-related settings in the
Communication Settings dialog box for the selected device.
In any device view or in Accounting Devices View, select a device.
In the menu bar at the top of the screen, click Device > Communication
Settings. Alternatively, right-click on your chosen device, and then in the
context menus click Communication Settings.
In the field next to the communication setting to be changed, enter the new
value. You may be able to use a selector or drop-down menu if available.
Click OK to save the updated value. There is no confirmation message; the
changes are saved immediately.
Some operations send a command or command file via a logical printer port.
The default logical printer port numbers begin with 9100. The valid range for
port numbers is 1024 to 65534. The number must match the port number of one
of the Logical Printers defined for a device. To determine the port number, see
the Logical Printers web page in the Command Center or the device home
page.
To access the Command Center, select a device.
Click Device > Device Home Page in the menu bar.
Click the Advanced tab at the top of the Command Center page.
To the left of the page, select Advanced, then select TCP/IP, and then select
Logical Printers. The TCP/IP port is displayed for each logical printer. One of
User Guide
Hide quick links:
Advertisement
Table of Contents
