Kyocera KM-F1050 User Manual page 38

Device
3
4
5
6
7
8
9
Permitting Jobs with Unknown IDs
1
2
Enabling Simple Login
1
2
3
3-18
If you want to get the network user property, click Obtain network user
property. Only ASCII characters are allowed in the text boxes.
Type the server name in the LDAP server name text box. The maximum is 64
characters.
Select the LDAP port number from the list. Available port numbers range from
1 to 65535.
Select the Search timeout (seconds) from the list. Available numbers of
seconds range from 5 to 255.
Select the LDAP encryption from the list. The LDAP encryption can be saved
to LDAPv3/TLS, LDAP over SSL, or it can be set to Off.
The device uses the Acquisition of user information settings for search and
retrieval of login user information from the LDAP server. Type a valid user name
in the Name 1 text box. The maximum length is 32 characters. Type another
valid user name in the Name 2 text box. The maximum length is 32 characters.
Type a valid e-mail address in the E-mail Address text box. The maximum
length is 32 characters.
You can proceed to the Permit jobs with unknown IDs check box, or you can
click OK to save your settings and close the dialog box.
If you want a device to have no user restrictions and accept print jobs without a
user login and password, you can select the Permit jobs with unknown IDs
check box. The default is for the check box to be cleared.
Select a device in the device list. In the menu bar at the top of the screen, click
Device > Advanced > Authentication Settings. The Authentication Settings
dialog box opens.
At the bottom of the dialog box select the Permit jobs with unknown IDs check
box. Click OK to save all your settings.
If you want to restrict the device with a user login, clear the Permit jobs with
unknown IDs check box. In the printer driver for the device, you must also click
Device Settings > Administrator, and select User login. Type the user name
and password for a specific user, or choose to have the device prompt for the
user name.
You can enable simple login for a printing system.
In any Device view, select a printing system.
Click Device > Advanced > Authentication Settings. If authentication is
required, enter a login and password.
Select the Simple login check box.
User Guide