Quick Start; Starting And Logging In; Editing Authentication Options - Kyocera KM-F1050 User Manual

Starting and Logging in

1
2
3
4

Editing Authentication Options

1
2
KMnet Viewer

1 Quick Start

Many features are available to help you organize and monitor network device
information.
These features are available for starting the application, discovering devices,
and getting familiar with the user interface.
Open the application.
If you have administrator rights, your last saved workspace appears and you
can proceed with your tasks. If you have administrator rights, and you are
starting the application for the first time, proceed to step 4.
If you do not have administrator rights, the network administrator must set up a
user login password for you. If no password has been set up, the application
does not start, and an access error message appears.
Type your password in the login text box, and click Submit. A password is a
maximum of 32 characters. A blank password is allowed.
If your submitted password is accepted, your last saved workspace appears,
unless it is your first time starting the application. If it is the first time, proceed to
step 4.
If the password is not correct, the application displays the dialog box and asks
you to enter the password again. If you incorrectly enter the password three
times, an error message appears, and the application does not start. If this
happens see the network administrator about your password.
If you just installed the application, and it is the first time you are starting it, a
dialog box appears after you have started and successfully logged in. You are
asked to specify a workspace file. After you specify your workspace file, the
application opens and displays the Add Device Wizard to help you search for
network devices and create the device list.
If a user does not have administrator rights on the computer with the application
installed, the network administrator can set up a user login password. If no
password has been set up for a user without administrator rights, the application
does not start, and an access error message appears.
In the menu bar at the top left of the screen, click Edit > Options. In the
Options dialog box, click Authentication.
Select Enable local password.
1-1