Deleting Contacts And Groups; Editing Contacts And Groups; Copying Contacts And Groups - Kyocera KM-F1050 User Manual

Device
1
2
3

Deleting Contacts and Groups

1
2

Editing Contacts and Groups

1
2
3

Copying Contacts and Groups

1
2
3
3-4
Double-click on an existing group to open the Group Settings dialog box.
Alternatively, select the group, then click the Properties icon to open the dialog
box.
Select one or more contacts to delete.
In the menu bar at the top left of the dialog box, click Remove members, then
click Yes to confirm.
Contacts and groups can be deleted from the address book when they are no
longer needed.
Select one or more contacts or groups.
In the menu bar at the top left of the dialog box, click Delete, then click Yes to
confirm.
The updated information is sent to the device.
The information saved in the Address Book (Add Contact or Add Group)
dialog box for each contact or group can be edited if necessary.
Select a contact or group item.
Right-click and select Properties. The Contact Settings or Group Settings
dialog box for the selected contact or group opens.
Edit the information in the dialog box, and click OK to save the changes.
Contacts and groups can be copied. This can save time when creating address
book entries that are very similar to existing entries.
Note: When performing this copy and paste operation, you should be aware
that the modifications will be applied after the Paste command.
Select the contact or group to copy, and click the Copy icon.
Click the Paste icon.
Modify the new contact or group as needed.
Each time a contact or group is copied, the name is changed as follows:
First time: "Copy" is added to the name.
Second time: "Copy 2" is added to the list.
Third time: "Copy 3" is added to the list.
User Guide