SWASH MIX
The swash mix function is used to correct the
swash plate in the aileron (roll) direction and
elevator (cyclic pitch) corresponding to each
operation of each condition.
Adjustment by independent curve for aileron,
elevator, and pitch operations is possible. The
operation can be smoothly adjusted by calling up
the "Curve setup" screen by pressing the enter
button with moving the cursor to the mixing item
that corresponds to the mixing and direction which
needs correction.
the setup screen shown below by pushing the
enter button.
[Return Key]
Setting method
to the left and push the enter button. (ON or
button to call the <Switch> screen and set the
switch and its ON position.
114
<Functions of Model Menu (Helicopter Functions)>
Example of use
undesirable tendencies in the roll direction
function to ON. When raising the nose at a
side.
(Currently selected condition name)
PUSH
[Cursor Lever]
[Data Input Dial]
[Enter Button]