AILEVATOR
This function improves the operating performance of
the roll axis by operating the elevators as ailerons.
Ailevator is where each elevator in a standard
(conventional) or v-tail moves independently, like
ailerons on a wing. In addition to each elevator side
moving up and down together, each side moves in
opposite directions when moving as an Ailevator. On
can serve the same purpose. Typically, both Ailevator
and ailerons are coupled together to maximize roll
performance, especially on larger wingspan planes.
the Function menu.
model menu and call the setup
screen shown below by pushing
the enter button.
[Return Key]
(Elevator function)
a n d r i g h t e l e v a t o r s w h e n t h e
elevator stick is manipulated can
be individually adjusted.
100
<Model Menu (Airplane/Glider Functions)>
(Effective only when 2 servos used at the elevators)
ELEVATOR
(AILERON 5)
(For more information, see the description
at the back of this manual.)
ELEVATOR 2
(AILERON 6)
(Currently selected condition name)
[Cursor Lever]
[Data Input Dial]
PUSH
[Enter Button]
(Aileron function)
as ailerons, aileron travel of
the left and right elevators
can be adjusted.